Custom Fitted Table Covers are the ideal booth display solution for trade shows, pop-up markets, corporate promotions and event displays.
Made of premium stretch polyester fabric, these fitted tablecloths wrap tightly around your table for a smooth, wrinkle-less appearance and hide supplies stored underneath.
We supply three popular styles: 3-sided open back, fully enclosed 4-sided, rear zipper and rear velcro fitted covers.
Standard sizes include 4ft, 6ft and 8ft, and custom sizes are supported for special tables.
Table Size
Length
Width
Height
4ft Table
48”=1220mm
24”=610mm
29”=740mm
6ft Table
72”=1830mm
30”=760mm
29”=740mm
8ft Table
96”=2440mm
30”=760mm
29”=740mm
Full dye-sublimation printing delivers vibrant, long-lasting graphics, logos and patterns that will not crack or peel after repeated use.
Suitable for small custom orders and wholesale bulk orders.
We offer free artwork review before production, and you can request pre-production photos to confirm the design.
Download our size drawing template to check dimensions, send your artwork to us for a fast quotation.
Polyester: 250gsm Polyester, Durable, easy to care for, and often wrinkle-resistant.
Not all fitted covers are waterproof. Stretch polyester or spandex covers are usually water-resistant or easy to clean, but liquids can soak through if spilled heavily.
Yes. Fitted covers are popular for outdoor events because the elastic edge helps them stay in place and resist wind. However, prolonged exposure to sun, rain, or damp weather may cause fading or mildew, so it is best to remove and store them after use.
Daily care: Wipe spills immediately to prevent staining.
Machine wash: Use cold or warm water on a gentle cycle with mild detergent.
Avoid bleach: Especially on colored or printed covers.
Drying: Air dry or tumble dry on low heat if the label allows. High heat can damage stretch fabric or create wrinkles.
Ironing: Only iron if the care label permits.
Yes, it can often be ironed on low to medium heat.
Most fitted covers are designed for standard rectangular, square, round, or oval tables. Many fit common 4ft, 6ft, and 8ft banquet tables, but sizes vary by brand. Always measure your tabletop before ordering.
Some suppliers offer custom sizes, colors, logos, or printing for exhibitions and events. You may need to provide exact length, width, height, corner style, and whether you want a zipper, open back, or leg openings.
Most fitted covers are designed for standard rectangular, square, round, or oval tables. Many fit common 4ft, 6ft, and 8ft banquet tables, but sizes vary by brand. Always measure your tabletop before ordering.
1.Lay it flat
Place the cover on a clean table or floor, with the top side facing up.
2.Smooth the fabric
Gently pull the edges to remove wrinkles and make the cover as flat as possible.
3.Fold the long sides toward the center
Bring one long side into the middle, then fold the other long side over it.
4.Fold in half lengthwise
Fold the cover from top to bottom so it becomes a long, narrow strip.
5.Fold into a square or rectangle
Fold it in half, and then in half again until it fits your storage space.
6.Store it flat or in a breathable bag
Keep it in a dry place. Avoid storing it while damp to prevent mildew.
